New build
Alarm and access control
Perimeter and interior alarm built into the system itself, with remote alerts to the owner and keyless entry by code or NFC.
24/7 alarmAccess control
Official Loxone Gold Partner
We'll do the automation drawings
We prepare the pre-installation pack free of charge at design stage. You fold it into your documentation, and the system is defined before the electrician sets out.
Timing
Automation is decided in the technical design
Once the electrical routing is set out, the opportunity has gone. What's left are surface-mounted wireless solutions that neither perform the same way nor sit well with the finishes you drew.
- ✓One bus, not twenty separate productsLighting, climate, blinds, security and energy share sensors and a server. That has to be planned in plan.
- ✓Space in the panelThe automation cabinet needs its place. It's the most expensive correction if it's forgotten.
- ✓No compromise on the finishSwitch plates that sit within your material language, not a keypad added at the end.
Free · no obligation
The pre-installation pack
Delivered within 10 working days from your plans. You can add it to your project documentation as it is, whether or not we end up carrying out the work.
01
Conduit layout
Drawn on your own plan: routes, boxes, cable sizes and space allowance in the panel.
02
System schematic
System architecture, server, extensions and zoning.
03
Electrical specification
Written so your installer can build it without interpretation. We stay available to answer their questions.
04
Budget at three levels
Essential, comfort and premium, costed per unit. So your client decides on figures rather than impressions.
Integration
We don't impose an ecosystem on you
We work with Loxone because a single manufacturer means a single point of responsibility in after-sales, and a cost per unit well below an equivalent KNX system. But when the project calls for something else, we integrate it.
If your client wants switch plates or lighting from a particular brand, or a third-party AV system, we work alongside them. The automation stays unified underneath.
- KNX
- DALI
- Modbus
- Heat pumps
- Third-party AV
- Solar self-consumption
- Access control
How we work with your studio
Four points of contact, no more
01 — Design stage
You send us the plans
A PDF or a DWG is enough. We return the pack within 10 working days.
02 — Technical design
Review with you
One joint review to align the system with your finishes and your switch plates.
03 — On site
Coordination with the electrician
One visit at setting-out, with the project's electrician or with ours. After that we don't need to take up your time.
04 — Handover
Commissioning
Programming, testing and training for the end client, with full documentation.
References
Delivered projects
Out of respect for our clients' privacy, properties are shown without address or identifying details.
New build
New build
Automation panel
Labelled circuit by circuit and documented at handover, sized so functions can be added later without rewiring.
LightingClimateBlinds
Send us the plans of a live project
We'll return the pre-installation pack within 10 working days. Free, no obligation, and yours to keep even if someone else builds it.